printed customised t shirts

Designed t-shirts Designed t-shirts
sDesigned t-shirts Designed t-shirts Designed t-shirts Designed t-shirts Designed t-shirts Designed t-shirts Designed t-shirts Designed t-shirts Designed t-shirts
Designed t-shirts
Designed t-shirts

Designed t-shirts

Designed t-shirts Designed t-shirts
A client testimony to our merchandise is the valid proof of our quality system in place and our friendly service. We wish our client to be well informed.

Many clients think that a good fabric feel and a good print or embroidery constitute a good T.Shirt. There are so many more aspects to be implemented to make a T-shirt really a good one.

We follow export norms for our all merchandise. As a default we always employ 100% combed cotton yarn which is the best yarn and gives much less hairiness but better sheen.

We use imported knitting machine from Germany, Soft flow dyeing machine from Italy, Compacting machine from US. These processes help us to get a right and fault free fabric at the out set even though above processing costs are higher compared other local alternates.

For sewing purposes we use Japanese machines with Coats thread. We always maintain no of stitches per inch to a maximum level possible so as to give a lasting rich product.
Designed t-shirts
For garment printing we use textile inks from USA. For embroidery we use Japanese Tajima machine with branded threads for sewing purpose. These translate in to a fine product and long lasting.

A right size of Print or Embroidery size has to be freezed to make the T.Shirt to look decent. And a proper placement of these graphics on the T-shirts also to be considered as a quality point and to be followed meticulously. We give a great deal of advice on them.

As an export norm, we always make a min of 3% more than your order quantity to take care of production rejections if any. Please be noted that this extra 3% of rejections or surplus goes to charity organizations every year end. You are contributing for this charity cause.

Each and every fabric lot is tested for following quality parameters before cutting stage :

1. Washing fastness.

2. Residual Shrinkage.

3. GSM.

4. Visual Observation for holes, dyeing streaks or any other defects.



Due to process and production limitations we have some standard industry allowance to pass the fabric or the finished garment.

Applicable tolerance levels / allowances are:

1. Washing fastness test: 3-4 on 0-5 scale. 0 being poorest 5 being the excellent.

2. Shrinkage test: Max plus or minus 5%. In width and length directions separately.

3. For measurements we have a industry standard tolerance limit of plus or minus 0.5inch for all parameters.

4. Plus or minus 10GSM from the specified GSM is acceptable.

If you wish to know more, we are willing to help you. Kindly drop us a mail. After all quality is a continuous process.
 
Designed t-shirts
Designed t-shirts
Designed t-shirts